Ingco MMA Welding Machine 380V ING-MMAC2506

Our review

This is a single-phase MMA (stick) welding machine from Ingco, drawing 380V input with a rated input capacity of 19.8 KVA. Its output current is adjustable from 50 to 250 amps, and it accepts electrodes from 3.2mm up to 6mm in diameter. That combination points to a unit built for heavier fabrication work rather than light household repairs. The 250A ceiling and 6mm electrode capability suit thicker steel sections, structural work, and longer runs where a smaller 200A-class machine would struggle. Before buying, confirm your supply actually provides 380V three-phase power, since this is not a 220-240V machine and will not run on a standard single-phase domestic socket. Also check that your wiring, breaker, and input cable can handle the 19.8 KVA draw at full output. Compare against 220V inverter welders if you only have domestic power, and against higher-duty industrial sets if you weld continuously at maximum current. Duty cycle and cooling details are not listed here, so ask the seller on Sokonia about those if your work involves long, uninterrupted welding sessions.